dmesg - phoronix-test-suite run pybench openssl HT off
Linux version 5.1.5-1.el7.elrepo.x86_64 (mockbuild@Build64R7) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-36) (GCC)) #1 SMP Sat May 25 16:10:51 EDT 2019
Command line: BOOT_IMAGE=/vmlinuz-5.1.5-1.el7.elrepo.x86_64 root=/dev/mapper/centos-root ro rd.lvm.lv=centos/root rhgb quiet
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000efffffff] usable
BIOS-e820: [mem 0x00000000fc000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000080f7fffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Xen HVM domU, BIOS 4.11.1-7.3.xcpng8.0 05/16/2019
Hypervisor detected: Xen HVM
Xen version 4.11.
Xen Platform PCI: I/O protocol version 1
Netfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated NICs.
Blkfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated disks.
You might have to change the root device
from /dev/hd[a-d] to /dev/xvd[a-d]
in your root= kernel command line option
HVMOP_pagetable_dying not supported
tsc: Fast TSC calibration using PIT
tsc: Detected 2597.025 MHz processor
tsc: Detected 2597.006 MHz TSC
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x80f800 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-combining
C0000-FFFFF write-back
MTRR variable ranges enabled:
0 base 0000F0000000 mask 3FFFF0000000 uncachable
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
last_pfn = 0xf0000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fb630-0x000fb63f]
Using GB pages for direct mapping
BRK [0x02a01000, 0x02a01fff] PGTABLE
BRK [0x02a02000, 0x02a02fff] PGTABLE
BRK [0x02a03000, 0x02a03fff] PGTABLE
BRK [0x02a04000, 0x02a04fff] PGTABLE
RAMDISK: [mem 0x355b7000-0x36ad3fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000EA020 000024 (v02 Xen )
ACPI: XSDT 0x00000000FC00D920 000044 (v01 Xen HVM 00000000 HVML 00000000)
ACPI: FACP 0x00000000FC00D2D0 0000F4 (v04 Xen HVM 00000000 HVML 00000000)
ACPI: DSDT 0x00000000FC0042A0 008FAC (v02 Xen HVM 00000000 INTL 20160527)
ACPI: FACS 0x00000000FC004260 000040
ACPI: FACS 0x00000000FC004260 000040
ACPI: APIC 0x00000000FC00D3D0 000460 (v02 Xen HVM 00000000 HVML 00000000)
ACPI: HPET 0x00000000FC00D8B0 000038 (v01 Xen HVM 00000000 HVML 00000000)
ACPI: WAET 0x00000000FC00D8F0 000028 (v01 Xen HVM 00000000 HVML 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000080f7fffff]
NODE_DATA(0) allocated [mem 0x80f7d5000-0x80f7fefff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000080f7fffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x00000000efffffff]
node 0: [mem 0x0000000100000000-0x000000080f7fffff]
Zeroed struct page in unavailable ranges: 99 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000080f7fffff]
On node 0 totalpages: 8386461
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 15296 pages used for memmap
DMA32 zone: 978944 pages, LIFO batch:63
Normal zone: 115680 pages used for memmap
Normal zone: 7403520 pages, LIFO batch:63
ACPI: PM-Timer IO Port: 0xb008
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ5 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ10 used by override.
ACPI: IRQ11 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 128 CPUs, 100 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xffffffff]
[mem 0xf0000000-0xfbffffff] available for PCI devices
Booting paravirtualized kernel on Xen HVM
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
random: get_random_bytes called from start_kernel+0x9b/0x526 with crng_init=0
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:128 nr_cpu_ids:128 nr_node_ids:1
percpu: Embedded 46 pages/cpu s147864 r8192 d32360 u262144
pcpu-alloc: s147864 r8192 d32360 u262144 alloc=1*2097152
pcpu-alloc: [0] 000 001 002 003 004 005 006 007
pcpu-alloc: [0] 008 009 010 011 012 013 014 015
pcpu-alloc: [0] 016 017 018 019 020 021 022 023
pcpu-alloc: [0] 024 025 026 027 028 029 030 031
pcpu-alloc: [0] 032 033 034 035 036 037 038 039
pcpu-alloc: [0] 040 041 042 043 044 045 046 047
pcpu-alloc: [0] 048 049 050 051 052 053 054 055
pcpu-alloc: [0] 056 057 058 059 060 061 062 063
pcpu-alloc: [0] 064 065 066 067 068 069 070 071
pcpu-alloc: [0] 072 073 074 075 076 077 078 079
pcpu-alloc: [0] 080 081 082 083 084 085 086 087
pcpu-alloc: [0] 088 089 090 091 092 093 094 095
pcpu-alloc: [0] 096 097 098 099 100 101 102 103
pcpu-alloc: [0] 104 105 106 107 108 109 110 111
pcpu-alloc: [0] 112 113 114 115 116 117 118 119
pcpu-alloc: [0] 120 121 122 123 124 125 126 127
xen: PV spinlocks enabled
PV qspinlock hash table entries: 512 (order: 1, 8192 bytes)
Built 1 zonelists, mobility grouping on. Total pages: 8255400
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-5.1.5-1.el7.elrepo.x86_64 root=/dev/mapper/centos-root ro rd.lvm.lv=centos/root rhgb quiet
printk: log_buf_len individual max cpu contribution: 4096 bytes
printk: log_buf_len total cpu_extra contributions: 520192 bytes
printk: log_buf_len min size: 524288 bytes
printk: log_buf_len: 1048576 bytes
printk: early log buf free: 515116(98%)
Memory: 32882208K/33545844K available (12291K kernel code, 2163K rwdata, 3752K rodata, 2368K init, 3556K bss, 663636K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=128, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 37198 entries in 146 pages
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=128.
rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=128
NR_IRQS: 524544, nr_irqs: 1856, preallocated irqs: 16
xen:events: Using FIFO-based ABI
xen:events: Xen HVM callback vector for event delivery is enabled
Console: colour VGA+ 80x25
printk: console [tty0] enabled
ACPI: Core revision 20190215
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 30580167144 ns
hpet clockevent registered
APIC: Switch to symmetric I/O mode setup
x2apic: IRQ remapping doesn't support X2APIC mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x256f2fb3afa, max_idle_ns: 440795291914 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 5194.01 BogoMIPS (lpj=2597006)
pid_max: default: 131072 minimum: 1024
LSM: Security Framework initializing
SELinux: Initializing.
*** VALIDATE SELinux ***
TOMOYO Linux initialized
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
*** VALIDATE proc ***
*** VALIDATE cgroup1 ***
*** VALIDATE cgroup2 ***
mce: CPU supports 2 MCE banks
Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
MDS: Mitigation: Clear CPU buffers
Freeing SMP alternatives memory: 32K
clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
Xen: using vcpuop timer interface
installing Xen timer for CPU 0
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2690 v4 @ 2.60GHz (family: 0x6, model: 0x4f, stepping: 0x1)
cpu 0 spinlock event irq 53
Performance Events: unsupported p6 CPU model 79 no PMU driver, software events only.
rcu: Hierarchical SRCU implementation.
NMI watchdog: Perf NMI watchdog permanently disabled
smp: Bringing up secondary CPUs ...
installing Xen timer for CPU 1
x86: Booting SMP configuration:
.... node #0, CPUs: #1
cpu 1 spinlock event irq 59
installing Xen timer for CPU 2
#2
cpu 2 spinlock event irq 65
installing Xen timer for CPU 3
#3
cpu 3 spinlock event irq 71
installing Xen timer for CPU 4
#4
cpu 4 spinlock event irq 77
installing Xen timer for CPU 5
#5
cpu 5 spinlock event irq 83
installing Xen timer for CPU 6
#6
cpu 6 spinlock event irq 89
installing Xen timer for CPU 7
#7
cpu 7 spinlock event irq 95
installing Xen timer for CPU 8
#8
cpu 8 spinlock event irq 101
installing Xen timer for CPU 9
#9
cpu 9 spinlock event irq 107
installing Xen timer for CPU 10
#10
cpu 10 spinlock event irq 113
installing Xen timer for CPU 11
#11
cpu 11 spinlock event irq 119
installing Xen timer for CPU 12
#12
cpu 12 spinlock event irq 125
installing Xen timer for CPU 13
#13
cpu 13 spinlock event irq 131
installing Xen timer for CPU 14
#14
cpu 14 spinlock event irq 137
installing Xen timer for CPU 15
#15
cpu 15 spinlock event irq 143
installing Xen timer for CPU 16
#16
random: fast init done
cpu 16 spinlock event irq 149
installing Xen timer for CPU 17
#17
cpu 17 spinlock event irq 155
installing Xen timer for CPU 18
#18
cpu 18 spinlock event irq 161
installing Xen timer for CPU 19
#19
cpu 19 spinlock event irq 167
installing Xen timer for CPU 20
#20
cpu 20 spinlock event irq 173
installing Xen timer for CPU 21
#21
cpu 21 spinlock event irq 179
installing Xen timer for CPU 22
#22
cpu 22 spinlock event irq 185
installing Xen timer for CPU 23
#23
cpu 23 spinlock event irq 191
installing Xen timer for CPU 24
#24
cpu 24 spinlock event irq 197
installing Xen timer for CPU 25
#25
cpu 25 spinlock event irq 203
installing Xen timer for CPU 26
#26
cpu 26 spinlock event irq 209
installing Xen timer for CPU 27
#27
cpu 27 spinlock event irq 215
smp: Brought up 1 node, 28 CPUs
smpboot: Max logical packages: 8
smpboot: Total of 28 processors activated (146415.49 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 32768 (order: 9, 2097152 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1559084443.698:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 1 ACPI AML tables successfully acquired and loaded
xen: --> pirq=16 -> irq=9 (gsi=9)
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 2 GPEs in block 00 to 0F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
acpiphp: Slot [3] registered
acpiphp: Slot [4] registered
acpiphp: Slot [5] registered
acpiphp: Slot [6] registered
acpiphp: Slot [7] registered
acpiphp: Slot [8] registered
acpiphp: Slot [9] registered
acpiphp: Slot [10] registered
acpiphp: Slot [11] registered
acpiphp: Slot [12] registered
acpiphp: Slot [13] registered
acpiphp: Slot [14] registered
acpiphp: Slot [15] registered
acpiphp: Slot [16] registered
acpiphp: Slot [17] registered
acpiphp: Slot [18] registered
acpiphp: Slot [19] registered
acpiphp: Slot [20] registered
acpiphp: Slot [21] registered
acpiphp: Slot [22] registered
acpiphp: Slot [23] registered
acpiphp: Slot [24] registered
acpiphp: Slot [25] registered
acpiphp: Slot [26] registered
acpiphp: Slot [27] registered
acpiphp: Slot [28] registered
acpiphp: Slot [29] registered
acpiphp: Slot [30] registered
acpiphp: Slot [31] registered
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfbffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
pci 0000:00:01.1: reg 0x20: [io 0xc220-0xc22f]
pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:01.2: [8086:7020] type 00 class 0x0c0300
pci 0000:00:01.2: reg 0x20: [io 0xc200-0xc21f]
random: crng init done
pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
* Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
* this clock source is slow. Consider trying other clock sources
pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB
pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf1000000-0xf17fffff pref]
pci 0000:00:03.0: [5853:0001] type 00 class 0x010000
pci 0000:00:03.0: reg 0x10: [io 0xc000-0xc0ff]
pci 0000:00:03.0: reg 0x14: [mem 0xf0000000-0xf0ffffff pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs *5 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs *5 10 11)
xen:balloon: Initialising balloon driver
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0x80f800000-0x80fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 62.500000 MHz counter
clocksource: Switched to clocksource xen
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
*** VALIDATE hugetlbfs ***
pnp: PnP ACPI init
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x08a0-0x08a3] has been reserved
system 00:01: [io 0x0cc0-0x0ccf] has been reserved
system 00:01: [io 0x04d0-0x04d1] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
xen: --> pirq=17 -> irq=8 (gsi=8)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
xen: --> pirq=18 -> irq=12 (gsi=12)
pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
xen: --> pirq=19 -> irq=1 (gsi=1)
pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
xen: --> pirq=20 -> irq=6 (gsi=6)
pnp 00:05: [dma 2]
pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
xen: --> pirq=21 -> irq=4 (gsi=4)
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
xen: --> pirq=22 -> irq=7 (gsi=7)
pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
system 00:08: [io 0xae00-0xae0f] has been reserved
system 00:08: [io 0xb044-0xb047] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xf0000000-0xfbffffff window]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes)
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: PIIX3: Enabling Passive Release
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: Activating ISA DMA hang workarounds
xen: --> pirq=23 -> irq=23 (gsi=23)
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 21620K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0xec000000-0xf0000000] (64MB)
Initialise system trusted keyrings
workingset: timestamp_bits=36 max_order=23 bucket_order=0
zbud: loaded
alg: No test for lzo-rle (lzo-rle-generic)
alg: No test for lzo-rle (lzo-rle-scomp)
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
intel_idle: Please enable MWAIT in BIOS SETUP
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
ACPI: Sleep Button [SLPF]
xen: --> pirq=24 -> irq=28 (gsi=28)
xen:grant_table: Grant tables using version 1 layout
Grant table initialized
00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
rdac: device handler registered
hp_sw: device handler registered
emc: device handler registered
alua: device handler registered
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:01.2: UHCI Host Controller
uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:01.2: detected 2 ports
uhci_hcd 0000:00:01.2: irq 23, io base 0x0000c200
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.01
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 5.1.5-1.el7.elrepo.x86_64 uhci_hcd
usb usb1: SerialNumber: 0000:00:01.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usbcore: registered new interface driver usbserial_generic
usbcore: registered new interface driver wishbone_serial
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: registered as rtc0
rtc_cmos 00:02: alarms up to one day, 114 bytes nvram, hpet irqs
intel_pstate: CPU model not supported
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
ledtrig-cpu: registered to indicate activity on CPUs
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
Initializing XFRM netlink socket
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Bridge firewalling registered
sched_clock: Marking stable (1931795075, 218553137)->(2226000192, -75651980)
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type encrypted registered
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha1
No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
xenbus_probe_frontend: Device with no driver: device/vbd/768
xenbus_probe_frontend: Device with no driver: device/vbd/5696
xenbus_probe_frontend: Device with no driver: device/vif/0
rtc_cmos 00:02: setting system clock to 2019-05-28T23:00:45 UTC (1559084445)
Freeing unused kernel image memory: 2368K
Write protecting the kernel read-only data: 18432k
Freeing unused kernel image memory: 2020K
Freeing unused kernel image memory: 344K
Run /init as init process
systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected virtualization xen.
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
systemd[1]: Reached target Timers.
systemd[1]: Reached target Local File Systems.
systemd[1]: Created slice Root Slice.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Created slice System Slice.
usb 1-2: new full-speed USB device number 2 using uhci_hcd
tsc: Refined TSC clocksource calibration: 2597.012 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x256f352d048, max_idle_ns: 440795202126 ns
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
usb 1-2: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00
usb 1-2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb 1-2: Product: QEMU USB Tablet
usb 1-2: Manufacturer: QEMU 0.10.2
usb 1-2: SerialNumber: 1
input: QEMU 0.10.2 QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-2/1-2:1.0/0003:0627:0001.0001/input/input5
hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU 0.10.2 QEMU USB Tablet] on usb-0000:00:01.2-2/input0
libata version 3.00 loaded.
ata_piix 0000:00:01.1: version 2.13
scsi host0: ata_piix
scsi host1: ata_piix
ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc220 irq 14
ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc228 irq 15
bochs-drm 0000:00:02.0: vgaarb: deactivate vga console
Console: switching to colour dummy device 80x25
[drm] Found bochs VGA, ID 0xb0c4.
[drm] Framebuffer size 8192 kB @ 0xf1000000, ioports @ 0x1ce.
[TTM] Zone kernel: Available graphics memory: 16454300 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:02.0 on minor 0
fbcon: DRM emulated (fb0) is primary device
Console: switching to colour frame buffer device 128x48
bochs-drm 0000:00:02.0: fb0: DRM emulated frame buffer device
FDC 0 is a S82078B
xen_netfront: Initialising Xen virtual ethernet driver
vbd vbd-5696: 19 xenbus_dev_probe on device/vbd/5696
blkfront: xvda: barrier: enabled; persistent grants: disabled; indirect descriptors: disabled;
xvda: xvda1 xvda2
ata2.01: ATAPI: QEMU DVD-ROM, 0.10, max UDMA/100
scsi 1:0:1:0: CD-ROM QEMU QEMU DVD-ROM 0.10 PQ: 0 ANSI: 5
sr 1:0:1:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:1:0: Attached scsi CD-ROM sr0
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[342]: Received SIGTERM from PID 1 (systemd).
Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
printk: systemd: 15 output lines suppressed due to ratelimiting
audit: type=1404 audit(1559084447.404:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 enabled=1 old-enabled=1 lsm=selinux res=1
SELinux: Permission getrlimit in class process not defined in policy.
SELinux: Class bpf not defined in policy.
SELinux: Class xdp_socket not defined in policy.
SELinux: the above unknown classes and permissions will be allowed
SELinux: policy capability network_peer_controls=1
SELinux: policy capability open_perms=1
SELinux: policy capability extended_socket_class=1
SELinux: policy capability always_check_network=0
SELinux: policy capability cgroup_seclabel=1
SELinux: policy capability nnp_nosuid_transition=1
audit: type=1403 audit(1559084447.582:3): auid=4294967295 ses=4294967295 lsm=selinux res=1
systemd[1]: Successfully loaded SELinux policy in 184.897ms.
systemd[1]: Inserted module 'ip_tables'
systemd[1]: Relabelled /dev, /run and /sys/fs/cgroup in 48.053ms.
EXT4-fs (dm-0): re-mounted. Opts: (null)
input: PC Speaker as /devices/platform/pcspkr/input/input6
piix4_smbus 0000:00:01.3: SMBus Host Controller not enabled!
sr 1:0:1:0: Attached scsi generic sg0 type 5
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-16 Joules
ppdev: user-space parallel port driver
cryptd: max_cpu_qlen set to 1000
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
EDAC sbridge: Seeking for: PCI ID 8086:6fa0
EDAC sbridge: Ver: 1.1.2
SGI XFS with ACLs, security attributes, no debug enabled
XFS (xvda1): Mounting V5 Filesystem
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[3165]: Received request to flush runtime journal from PID 1
XFS (xvda1): Ending clean mount